The Pipe Support Blog

These pre-insulated pipe supports were manufactured for a Houston based engineering and construction company to complete an on-going project in South Africa. The polyurethane foam insulation is wrapped with a vapor barrier to prevent moisture, and the ends are coated with a monolar mastic paint to seal the pores. The carbon steel fabrication that surrounds the insulation has an elaborate three-coat paint system to help protect the steel from corrosion. This design allows for an integral combination of insulation and structural support in one pipe support assembly. It also minimizes labor in the field in regards to the installation of insulation.

Do you require pipe shoes like those described above? Let us price them for you!

Hot Shoe for a Refining Company

This hot shoe was fabricated from carbon steel, calcium silicate and Firetemp®. Firetemp® is the insulation that carries the load of the pipe. In addition, calcium silicate was also used because it has a lower density, making it a better insulator. This shoe is used as a pipe support and can handle temperatures of up to 1,200F. It measures at 73 in diameter with 5 insulation and weighs 2,391lbs. This hot shoe was expedited in one week per customers request.

Do you require hot shoes for your current or future job? Get pricing today!

B-Type Constants for a Power Plant in Kentucky

These constants were fabricated from carbon steel hardware and structure. The vertical constants are used to support pipes and other equipment. They range from 4 to 6 feet and weigh between 690 lbs to 2,850 lbs. The constants have a total travel capacity of 7 to 8 . Standard load testing was completed to ensure quality and performance.

Want to learn more about constant springs? View a constant webinar today!

Snubbers with Yoke Clamps for a LNG Plant

Snubbers are restraining devices. They allow free thermal movement during normal operations but restrain in abnormal circumstances such as with an earthquake. These snubbers were fabricated from carbon steel. They measure 2 1/2” x 24” and the yoke clamps have pipe sizes of 23” and 25”. Each snubber weighs 890 lb. and has a travel capacity of 24”. Designed for the support of a cryogenic line, these snubbers can handle loads of up to 2,900 lb.

Want to learn more about snubbers? Instantly view a past snubbers webinar today!

4 Pig Launchers and Receivers for a Petroleum Company

These pig launchers were manufactured from carbon steel. They have a 16 major barrel, 12 minor barrel and measured 121 long. The pig launchers and receivers are used for cleaning piping systems. In addition, the pig launchers and receivers were designed for pressures of 512 PSIG at 100F. Hydro-tests were performed at 666 PSIG and x-ray tests were completed to ensure quality performance.

Do you require pig launchers or receivers in your piping system? Get pricing today!

U-Type Constants for an Oil Refinery in Taiwan

These Figure 200 U-Type horizontal upthrust constants are designed to support piping from below. They are fabricated from carbon steel. These constants were also hot dipped galvanized and then specially painted. In addition, they are able to handle loads of up to 13,600 lbs. Each constant has a capacity of 4 total travel. They range from 55 to 62 long. Load testing and external inspections were completed to ensure the quality of these constants.

Want to learn more about constants? View a constant spring webinar today!

75 Hot Shoes for a Construction Project in New Hampshire

Hot Shoe Insulation

These pre-insulated hot shoes are manufactured from carbon steel and insulated with Firetemp® and Foamglas. Firetemp® is a structural insert designed to carry the load capacity of the pipe while Foamglas is fragile and can support temperatures of up to 900F. The hot shoes measure 19 long with the base of pipe at 6. They weigh between 58 lbs to 185 lbs. The pre-insulated shoes are designed to maintain the insulated pipes at a temperature for functionality.

Do you require hot shoes like the ones described above? Let us price them for you now!

Pressure Vessel for a Chemical Company

Top of Pressure Vessel

This pressure vessel is manufactured from carbon steel SA516-70. Its diameter is 48 by 96 tangent to tangent and weighs 2,140 lbs. The pressure vessel is used as a process feed tank and was painted for rust resistance. In addition, the vessel was designed for pressures at 15 PSIG and temperatures at 86F. Hydro-tests were conducted at 20 PSIG and x-ray tests were completed to ensure quality performance.

Do you require a tank or vessel for your current job? Get pricing now!

100-B Type Constants

Two Constants

These PTP 100-B type constants were fabricated from A36 carbon steel. They are vertical constants designed to suspend from a beam to support pipes. These constants are capable of handling loads of up to 31,000 lbs. and have a total travel capacity of 3. Each measured 25 long, 13 wide, and 71 tall and weighed 1,850 lbs. Standard load and travel testing were completed to ensure the quality and performance of these constants.

Do you see a need for constants in your piping system? Let us price them today!

Horizontal Upthrust Constants for a Power Plant

The horizontal upthrust constants (Fig. PTP200-U) were fabricated from carbon steel and chrome-moly for a Heat Recovery Steam Generator. The constants range in sizes PTP-200 size 3 to 65 and weigh from 24 lbs to 1,300 lbs. They support loads of 100 lbs to 8,100 lbs. The constants support pipes and equipment subjected to vertical movement due to thermal expansion at locations where transfer of stress to other supports or equipment can be critical. Horizontal upthrust constants are utilized in areas where horizontal travel is unacceptable. Standard testing was completed for performance and quality assurance.

Want to learn more about constant springs? View a constant webinar today!