The Pipe Support Blog

Do you have a need for cold shoes in your piping system? Get pricing today!

A total of 295 cryogenic pipe supports ranging from 4" to 38" NPS were designed for a LNG regasification facility in India. The shoe and bearing plates were fabricated from carbon steel, the jacket was fabricated from aluminized steel and includes a vapor barrier. 20 PCF high density polyurethane foam was used for the insulation.

Do you see a need for cryogenic supports in your piping system? Get pricing today!

Insulated Pipe Supports for Temperatures as Low as -260°F

These cryogenic supports (also known as cold shoes) are fabricated from 20 PCF polyurethane insulation, weigh 650 lb. each and are designed for 30" diameter pipe. They are comprised of a carbon steel base plate and bearing plate, a vapor barrier and an aluminum jacket. The supports are designed for temperatures as low as -260°F, and measure 27" length by 44" height. A total of thirty-four supports were fabricated for natural gas applications, including storage and transport.

Do you see a need for cryogenic supports in your piping system? Get a quote today!

Check out our most recent article that looks at the history of insulated pipe supports through the past 100 years.  Learn about the developments made in the 1950's and 1960's that introduced the use of "Foam Glass", a lightweight material that is manufactured primarily from recycled glass and used in the design of insulated pipe supports. Later, polyurethane was developed to provide greater load carrying capabilities. Read the full article on the:

History of Insulated Supports

Permali Insulated Pipe Anchors

Want to learn more about pre-insulated supports? Instantly view a past pre-insulated support webinar now!

Cryogenic Supports with Permali Insulation

Over 30 cryogenic supports fabricated from a combination of carblon steel, permali block and stainless steel were manufactured for an LNG plant in Abu Dhabi. The shoes measures 18" x 14" x 12" and are designed for 10" of thermal movement and temperatures as low as -167°C. The cold shoes are coated with a custom paint job and went through standard testing prior to shipment.

Have a need for cryogenic supports in a current or upcoming project? Get a quote today!

Sliding Cryogenic Insulated Supports

These sliding cryoshoes are fabricated from carbon steel with 2" thick polyurethane insulation. The polyurethane is 20 lb. density, which has a compressive strength of 500 psi and a tensile strength of 600 psi. The cold shoes are designed for temperatures as low as -300°F and for loads up to 3,500 lb. They will be used to support a 60" diameter low temperature vapor line in a Texas facility.

Want to learn more about cryogenic supports? Instantly view a past webinar now!

These cold shoes are fabricated from stainless steel and carbon steel with Micarta insulation. The supports vary in length from 12" to 36" and are capable of temperatures as low as -260°F. 40 supports in total were fabricated and hot dipped galvanized for corrosion protection at a LNG plant.

Do you see a need for cryogenic supports in your piping system? Get pricing today!

The cold shoes are fabricated from a combination of carbon steel, micarta insulation, and stainless steel. They measure 18" x 12" x 10" and are designed for 7" of lateral movement with temperatures as low as -162°C. A total of 16 supports were manufactured and PMI tested. This was a rush order completed in just under 12 weeks for a LNG plant.

Want to learn more about pre-insulated supports? Instantly view a pre-insulated support webinar!

Pre-Insulated Pipe Supports for 56" pipe size

Pre-Insulated Pipe Supports for 36" pipe size

The cold shoes were fabricated from a combination of 10 and 20 PCF of polyurethane insulation. They also include a vapor barrier, aluminum jacket, acoustic layer, and are coated with a hot dipped galvanized finish. The supports will be used for a project in North Africa.

Want to learn more about pre-insulated supports? Watch a recording of a past webinar!

.

Pre-Insulated Pipe Supports for an LNG Plant

PT&P manufactured a total of 1,400 supports for an LNG project. 75 of those supports were cold supports completed in less than one week on an emergency basis. The cold shoes were fabricated from a combination of polyurethane foam, carbon steel metal straps, and an aluminum metal jacket for insulation. They are designed for temperatures as low as -300°F and pipe sizes ranging from 12" to 36" in diameter. The 36" diameter shoes are designed for a vertical load of 102,000 lb. and the 12" diameter shoes are designed for 36,000 lb. load.

Do you require pre-insulated supports in your piping system? Get a quote from us now!