The Pipe Support Blog

Cold Insulated Pipe Anchors with Axial Stops

Posted by Sylvia Ibarra on Aug 15, 2011

Cold insulated pipe anchors with axial stops

Cryogenic pipe supports, ranging in diameter from 6" to 38", were designed to support and insulate piping in an LNG receiving and regassification plant. The "cold shoe anchors" were designed for temperatures down to -260°F and a load range of 26,000 lb. to 210,000 lb. A combination of high density polyurethane foam (PUF) and Permali® was used for the insulation. The center stops that are welded to the process pipe were built from 304 stainless steel, and carbon steel was used for the remainder of the shoe.

Cold insulated pipe anchors with axial stops

Do you have a need for cold shoes in your piping system? Get pricing today!

Click me

0 Comments Click here to read/write comments

Tags: Pipe Anchors, Cold Shoes, Pre-Insulated Pipe Supports

Custom Carbon Steel Pipe Anchors and Pipe Shoes

Posted by Justin L on Jul 25, 2003
Custom Carbon Steel Anchors and Shoes

Custom Carbon Steel Anchors and Shoes

Piping Technology and Products, Inc. fabricated 4702 carbon steel pipe shoes for various pipe sizes ranging from 2” to 10”. As per customer request, the shoes are designed to accommodate 30 PSI compressive strength. A three-coat paint system was applied for corrosion protection. All supports were liquid dye-penetrant tested at 5% of welds.

Custom Carbon Steel Anchors and Shoes

Anchors & Shoes on Shipping Floor

Do you need custom pipe anchors for your current or future project? Let us price them for you today!

Click me

0 Comments Click here to read/write comments

Tags: Guides and Anchors, Pipe Anchors, Pipe Shoes, Fabricated Pipe Shoes

All posts