Subject: Pipe Clamp Design, Application & Installation
** Webinar is worth 1 PDH Credit for TX Professional Engineers
This presentation will cover Pipe Clamps, including Hold-Down Clamps, Riser Clamps, Clevis Hangers, Yoke U-Bolt Clamps and Structural Supports. Learn how the appropriate type of pipe support is chosen based on the different design conditions. Find out how Finite Element Analysis is used in the design process and view the custom pipe supports designed for extreme applications.
Tags:
Clamps,
Clamp,
Pipe Clamp Assembly,
Riser Clamp,
Yoke Clamp,
Clevis Hangers,
Yoke U-Bolt Clamps,
Pipe Clamps,
Riser Clamps,
Hold Down Clamps,
3-Bolt Clamp,
Pipe Clamp,
3-bolt Pipe Clamp,
3-bolt pipe clamps,
clevis hanger,
Clamp Assemblies,
Clamp Assembly
Subject: Design, Application & Installation of Pipe Clamps
** Webinar is worth 1 PDH Credit for TX Professional Engineers
Date: Thursday, November 17, 2011
This presentation is on Pipe Clamps, including Hold-Down Clamps, Riser Clamps, Clevis Hangers, Yoke U-Bolt Clamps and Structural Supports. Learn how the appropriate type of pipe support is chosen based on the different design conditions. Find out how Finite Element Analysis is used in the design process and view the custom pipe supports designed for extreme applications. Finally, view the value-added services offered by PT&P and rest assure that your pipe clamp needs can be covered by our 24x7 web-based emergency services, field services and quick-turn around time when you need it most. The featured presenter, Jerry Godina has over 13 years experience as a pipe support designer and manages PT&P's engineer training development program. He also inspects existing supports, consults on site remediation projects and oversees installation on a regular basis.
Tags:
Structural Supports,
Clevis Hangers,
Yoke U-Bolt Clamps,
Pipe Clamps,
Riser Clamps,
Hold Down Clamps,
Support Assembly Components
Drawing of Complete Assembly
Pedestals and Beams in Operation
The 54" suction line carrying gas to a gas compressor at a rate of 1.7 million lb./hr. developed a severe vibration. The deflections in the line were up to 3/4" and it was fully observable during operation.
PT&P designed and manufactured a special elevated hold-down clamp, including a unique laminated vibration dampening lining. The entire pipe hanger assembly stands 22' high and is coated with a carboline zinc finish. After installation and resumption of operations, the vibrations are now almost imperceptible.
Want to learn more about pipe clamps? View a recording of our pipe clamp webinar now!
Tags:
Hold Down Clamps,
Support Assembly Components
Two 16 Dia. HD-2 Hold Down Clamps for an Oil Refinery
Piping Technology and Products, Inc. recently designed and manufactured two HD-2 hold down clamps to fit a 16 pipe at an oil refinery in Michigan. These hold down clamps are designed to be used on pipe lines where there is a high temperature and great thermal movement requirements. They allow axial movement while restraining lateral movement. The clamp and base plate are fabricated from carbon steel with PTFE, 25% glass filled, bonded to the radius and plate.
Do you see a need for hold down clamps in your piping system? Get pricing today!
Tags:
Clamps,
Pipe Clamps,
Hold Down Clamps,
Support Assembly Components
Two Hundred HD-2 Hold Down Clamps
PT&P designed and manufactured two hundred and thirty HD-2 hold down clamps to fit 6” to 8” pipes at a chemical refinery. These hold down clamps are used on pipe lines where there is a high temperature and great thermal movement requirements, they allow axial movement and restrain lateral movement at the same time. The clamps are fabricated from carbon steel with 3/32” PTFE, 25% glass filled, bonded to the radius. The plates are manufactured from three layers of materials; 3/32” PTFE, 25% glass filled, 1/2” thick fabric belting material and carbon steel.
Want to learn more about hold down clamps? View a past pipe clamp webinar now!
Tags:
Clamps,
Hold Down Clamps,
Support Assembly Components,
Pipe Clamp
42” Hold Down with Wedge Support
PT&P designed and fabricated a Hold Down with wedge support for a 42” pipe. The entire assembly is PTFE, 25% glass filled, bonded and will be used to control and reduce pipe vibration at an LNG plant. Both the Hold Down and wedge support are made from A36 Carbon Steel and a fabric pad which is exceptionally suited for vibration impact and declination.
Want to learn more about hold down clamps? View a past pipe clamp webinar now!
Tags:
Clamp,
Hold Down Clamps,
Support Assembly Components,
Pipe Clamp
Hold Down Pipe Clamps for an Engineering and Construction Company
Piping Technology & Products manufactured 2" hold down pipe clamps (figure HD-1) for an engineering and construction company.
The figure HD-1 is PT&P's anchor type hold down and is usually used on pipe lines where little or no insulation is required. These hold down clamps were constructed of SA36 carbon steel for temperatures to 750ºF.
Need hold down clamps? We're happy to serve your needs!
Tags:
Hold Down Clamps,
Support Assembly Components,
Pipe Clamp
