Piping Technology & Products
The ladders and platforms were designed to be installed on a 90' tall pressure vessel. The ladders were fabricated from carbon steel and ranged in size from 5' to 38' in length. The vessel platforms were also fabricated from carbon steel and measure up to 16'-6" in diameter.
Do you require ladders or platforms for a vessel or tank? Let us serve your needs today!
Tags: ladder, platform, Pressure Vessel, ASME/Miscellaneous Fabrication
Submarine Drum Vessel
Do you have an upcoming requirement for a tank or ASME vessel? Get pricing today!
Tags: Submarine Drum Vessel, Pressure Vessel, ASME/Miscellaneous Fabrication
This high pressure knock-out drum has a 2.5" thick shell fabricated from ASTM SA516 Grade 70, and a SA105 and SA350 carbon steel flange. The drum has a 48" diameter, a total length of 15'8" and weighs over 23,000 lb. It underwent a hydro-test and design test per ASME section VIII-1 "U" stamp vessel prior to shipment.
Do you require a vessel or knock-out drum for your project? Get pricing today!
Tags: Knock-out Drum, High Pressure, Pressure Vessels/Tanks, Pressure Vessel, ASME/Miscellaneous Fabrication
Pressure Vessel for a Chemical Company
Top of Pressure Vessel
This pressure vessel is manufactured from carbon steel SA516-70. Its diameter is 48 by 96 tangent to tangent and weighs 2,140 lbs. The pressure vessel is used as a process feed tank and was painted for rust resistance. In addition, the vessel was designed for pressures at 15 PSIG and temperatures at 86F. Hydro-tests were conducted at 20 PSIG and x-ray tests were completed to ensure quality performance.
Do you require a tank or vessel for your current job? Get pricing now!
Sweco Fab, Inc. recently designed and fabricated a 2800 lb. pressure vessel for an oil refining company in the United Arab Emirates. This pressure vessel will be used as a dust collector to filter a process fluid for an unleaded gasoline project. The vessel, 30" in diameter and 14'-11" OAL, is designed for 150 PSIG and 248°F. Spot radiography, dye-penetrant, and hydrostatic tests were implemented to ensure product quality.
Do you have a requirement for a vessel or tank? Get pricing today!
108" I.D. x 144" T-T Vessel
Sweco Fab, Inc., the ASME code fabrication shop for Piping Technology & Products, Inc., specially designed and fabricated a 108" I.D. x 144" T-T vessel for the Texas A&M University. The "Aggie Vessel" will be used for special research project at the university. A 24" T-bolt closure was used for access to the vessel and two stiffner rings were installed to withstand vacuum application. Unique internal design was also applied to facilitate special equipment installation. Helium leak test at 1x10-6 cc/sec will be performed to detect leakage.
Are you in need of a vesssel? Request a quote today!
48" Diameter x 96" S/S Vertical Carbon Steel Filter Vessels
