The Pipe Support Blog

4 Pig Launchers and Receivers for a Petroleum Company

These pig launchers were manufactured from carbon steel. They have a 16 major barrel, 12 minor barrel and measured 121 long. The pig launchers and receivers are used for cleaning piping systems. In addition, the pig launchers and receivers were designed for pressures of 512 PSIG at 100F. Hydro-tests were performed at 666 PSIG and x-ray tests were completed to ensure quality performance.

Do you require pig launchers or receivers in your piping system? Get pricing today!

24" x 30" diameter, 740 PSIG Pig Launchers and Receivers

The launchers and receivers, with dimensions of 24" x 30" x 138" long and 10" x 14" x 132" long, are designed for 740 PSIG at 170 degrees. One of the Pig Launchers and Receivers composed of a 24" dia. minor barrel and a 30" dia. major barrel, while the other one consisted of a 10" dia. minor barrel and a 14" dia. major barrel. The major and minor barrels are fabricated from API 5L X 52. To ensure quality, the Launchers and Receivers were 100 % x-rayed and hydro-tested prior to shipment.

Pig Launchers and Receivers are installed in pipelines to launch and receive Pipeline Pigs. Pigs can be used for the cleaning of pipelines. In addition, Pigs can be used for the separation of two products within the same pipeline. Sweco Fab/Piping Technology & Products, Inc. has over 40 years of experience in designing and manufacturing a wide variety of ASME/Misc. Fabricated Products - including Pig Launchers and Receivers.

Do you see a need for pig launchers in your piping system? Get a price quote today!

Pig Receiver with Saddle Supports

Sweco Fab, Inc. recently fabricated a Pig Receiver Class 600 with saddle supports for an industrial company in Texas.  The pig receiver is composed of a 24 dia. minor barrel and a 30 dia. major barrel with 1 thick walls. It is approximately 250 in length and weighs 8,200 lb. The major and minor barrels are fabricated from API-5L Gr.B, X42 and SA106B material, respectively. All other items are fabricated from SA105, SA106B, and SA-36 as applicable. The receiver is designed per ASME B31.8 with a 0.72 Design Factor and NACE MP-01-75. The design pressure is 1480 PSIG at 125°F.

Do you see a need for a pig launcher or receiver in your piping system? Get pricing now!

Pig Launchers and Receivers for Venezuela

Sweco Fab, Inc. designed and manufactured pig launchers and receivers for an oil and gas exploration and production company in Venezuela.

The launchers and receivers are designed with a 6 line and 8 barrel at 60 long with a 4 kicker, ¾ in. P.I., 2 vent and drain design per ASME B31.4. They are made to withstand 1480 PSIG at 100ºF and can accommodate 15 pigs. They were painted inside and out per System 6E grey color and included simple skid, MTR, N.D.E., and flange protectors.

Learn about these products and more from our webinar archives!

4" Pig Launchers and Receivers for a Water Reclamation Plant

Sweco Fab, Inc. manufactured 4" pig launchers and receivers for a water reclamation plant in Savage, Maryland.

These launchers and receivers are to aid in the utilization of an oxidation ditch activated sludge process designed for nitrification / de-nitrification and phosphorous removal. The design consists of components such as T-bolt closures, side outlet tees and 4", 150-psi flanges with protectors. After being built to ASME, Sect. VIII, Div. 1, the launchers and receivers were shop prime painted to prevent against corrosion.

Need pig launchers and/or receivers? Request a quote today!