The Pipe Support Blog

Pre-Insulated Pipe Supports for 56" pipe size

Pre-Insulated Pipe Supports for 36" pipe size

The cold shoes were fabricated from a combination of 10 and 20 PCF of polyurethane insulation. They also include a vapor barrier, aluminum jacket, acoustic layer, and are coated with a hot dipped galvanized finish. The supports will be used for a project in North Africa.

Want to learn more about pre-insulated supports? Watch a recording of a past webinar!

.

Custom U-Type Constant Spring Supports with Slide Plates

PT&P fabricated 12 constant spring supports of various sizes with PTFE, 25% glass filled slide plates. The smallest constant is 38.25" length x 13" width x 28" height, and the largest is 52" length x 19" width x 28" height. The designed loads vary from 13,264 lb. to 15,962 lb. and the total travel range is 2" to 3".

Do you require constants or slide plates in your piping system? Get a quote today!

Custom Constant Spring Hangers and Pipe Clamps

The constant spring hangers are manufactured from A36 carbon steel and have custom 4-bolt pipe clamps due to heavy loads. The dimensions are 40" length x 18" width x 85" height and are designed for a 1,784 lb. load with 10" of travel. The constants will be used to support radiant inlet manifolds and have a unique paint applied due to the highly corrosive condition. The entire pipe hanger assembly went through load and travel testing prior to shipping.

Want to learn more about constant springs? Instantly view a past constant webinar!

Pre-Insulated Pipe Supports for an LNG Plant

PT&P manufactured a total of 1,400 supports for an LNG project. 75 of those supports were cold supports completed in less than one week on an emergency basis. The cold shoes were fabricated from a combination of polyurethane foam, carbon steel metal straps, and an aluminum metal jacket for insulation. They are designed for temperatures as low as -300°F and pipe sizes ranging from 12" to 36" in diameter. The 36" diameter shoes are designed for a vertical load of 102,000 lb. and the 12" diameter shoes are designed for 36,000 lb. load.

Do you require pre-insulated supports in your piping system? Get a quote from us now!