The Pipe Support Blog

Hydraulic Snubbers for a Construction Site

Piping Technology & Products recently designed and manufactured three hydraulic snubbers for a construction site in Louisiana.

These snubbers, with an operating load of 3500 lbs., are 2.5 x 6 and allow for 4 of total travel distance. The lock-up velocity test was performed on these snubbers to make sure that at high rates of loading, especially impact, the snubber would provide very high resistance to movement. And, the drag test was performed to make sure that at low speeds they provide very low resistance to movement.

Do you see a need for hydraulic snubbers in your plant? Let us price them for you today!

Sway Braces for Petroleum Company in Louisiana

Piping Technology & Products, Inc. specially designed and fabricated ten sway braces, with total travel distance of 14, for a petroleum company in Louisiana.

The standard PT&P braces have springs that allow 3 of total travel distance. These sway braces were custom designed to provide total travel distance of 5 and 14. The center-to-center dimensions ranged from 92¼" to 115" with internal supports to prevent buckling. The desired spring rates for the sway braces were 450 lb./in. and 1350 lb./in. The custom sway brace assemblies comprised of pipes (for spring housing), springs (sizes dependent on spring rate and total travel) and in some cases, ball joints.

Do you need sway braces for an upcoming project? Request a price quote today!